19.5g 75mm 1S Diamond F4 AIO 5A BB2 ESC Frsky Reciver 25/200mW VTX Whoop FPV BNF w/ EX0802 19000KV Unibell Motor Runcam Nano 3 800TVL Camera

facebook like, tweet button, Email to a Friend
  •  Be the first to review this product

PID: 68325


Out of Stock
or 4 interest free payments of $74.99 with ,zip

Postage

Enter and Choose Your Suburb to Check the Postage

Delivery & Handling: Out of delivery area.  ETA:

Customer Who Bought These Products Also Bought

Product:



Notice: Because the MPU6000 is out of production, the flight controller and related Drone will gradually be replaced by ICM20689 or BMI270.


Notice: 

Because the previous materials of the bag are seriously out of stock, happymodel change it in soft fabric material .

At present, our stock are mix, will send randomly.

July  18th, 2021.


Specification:

Brand: Happymodel 

Item Name: Moblite7 1S 75mm ultra light brushless whoop
Wheelbase: 75mm
Size: 97x97x25mm
Weight: 19.5g (without battery)
Weight: 36g (with Original 1s 650mah Lipo battery )

 Motor

 Model: EX 0802 19000KV ( New Unibell Version)

 Configuration: 9N12P
 Stator Diameter: 8mm
 Stator Length: 2mm
 Shaft Diameter:?1mm
 Motor Dimension(Dia.*Len): ?10.5mm*14.9mm
 Weight(g): 1.7g
 No.of Cells(Lipo): 1S only

 Flight Controller

 (Frsky SPI RX Version) DiamondF4 FR FC Firmware   Target: CrazybeeF4FR

 MCU: STM32F411CEU6 (100MHZ, 512K FLASH)
 Sensor: MPU6000 Or ICM20689 or BMI270. (SPI connection)
 Original whoop size compatible
 Power supply: 1S battery input (DC 2.9V-4.35V)
 Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
 Built-in Betaflight OSD(SPI Control)
 Built-in 5.8G VTX
 Built-in SPI Frsky/Flysky receiver
 Built-in 5V 1A BEC

 Onboard 4in1 ESC

 MCU Upgraded to EFM8BB21

 Power Supply: 1S LiPo/LiPo HV
 Current: 5A continuous, peak 6A (3 seconds)
 Support BLHeliSuite programmable
 Factory Firmware: O_H_50_REV16_8.HEX
 Default Protocol: DSHOT600

 Onboard Frsky SPI D8 receiver Version

 SPI BUS Receiver Frsky D8 Compatible

 Compatible Non EU transmitter D8 model
 Channels: 8CH
 Failsafe Support
 No ground interference ( Transmitter and receiver 1 m from the   ground): 200m~300m
 Onboard Flysky Receiver Version
 SPI BUS Receiver
 Protocol: AFHDS and AFHDS-2A Switchable
 Channels: 8CH (AFHDS) or 14CH (AFHDS-2A)
 No ground interference ( Transmitter and receiver 1 m from the   ground): 100~200m
 Failsafe Support

 Onboard 5.8G 40CH 25-200mW VTX

 Output Power: 25mw~200mw switchable

 Frequency: 40CH
 Input Voltage: 3.3V 5.5V
 Current Consumption: 300mA (type)
 Frequency: 5.8GHz 5bands 40 channels (include Race band)
 Smartaudio Ready

 Runcam Nano 3 FPV Camera

Model: RunCam Nano 3

Image Sensor: 1/3' CMOS
Horizontal Resolution: 800TVL
Lens: 2.1mm(M8) FOV 160?br>Signal System: PAL/NTSC Non Switchable
S/N Ratio: >50dB
Electronic Shutter Speed: Auto
Auto Gain Control (AGC): Auto
Min. Illumination: 0.01Lux@1.2F
D-WDR: Auto
Day/Night: Color
Power:DC 3-5.5V
Current: 110mA@5V 120mA@3.3V
Housing Material: ABS
Net Weight: 1.2g
Dimensions: L14mm*W14mm*H9mm

 Lipo Battery

 Capacity: 650mAh

 Voltage: 3.8V
 Continuous Discharge Rate: 30C
 Instantaneous Discharge Rate: 60C
 Size: 60mmx18mmx8mm 
 Weight: 16g
 Connector: PH2.0

 Quantity: 2 PCS


Features:
- The lightest 1s 75mm brushless whoop
- Powerful and efficiency
- The lightest 1s AIO 5IN1 F4 flight controller
- New Unibell EX0802 brushless motors
- Low profile Canopy design
- VTX power switchable 25mw~200mw

Package Included:

1 x Happymodel Moblite7 75mm Whoop RC FPV Racing Drone
Option1: 1 x DiamondF4 FR built-in SPI Frsky Receiver
Option2: 1 x DiamondF4 FS built-in SPI Flysky Receiver
4 x EX0802 KV19000 Unibell Brushless Motor
1 x HQPROP 40MMX2 Propeller(4cw+4ccw)
1 x Runcam Nano 3 FPV Camera
1 x Built-in 5.8G 40ch 25mw-200mw VTX
2 x 1S 650mah Lipo Battery
1 x Propeller Disassemble Tool
1 x Screwdriver
1 x Happymodel Carry Case

Warranty:

This product comes with a 30 Days Manufacturer's Warranty, please click here for details.

For warranty and returns assistance please contact us.

Statutory conditions and warranties also apply.

© Copyright 2012 - 2024 Best Deals Store. All Rights Reserved.

The BestDeals 30 Day Change-of-Mind Policy

Online shopping sometimes means you don't get exactly what you had in mind. You are welcome to return the item as long as you meet the following terms and conditions as listed below:

Terms & Conditions

  • Notification is required within 30 days of purchase date.
  • Item to be returned must be in their original re-saleable condition with all tags and packaging (ready to be put back on the shelf).
  • The item/s are NOT opened, used, worn or damaged.
  • That you DO NOT stick or write anything on the item itself or its packaging. Please only write or place postage stickers on the outer postage packaging.
  • Some items are not eligible for refund due to hygienic reasons
  • The refund amount will not include delivery costs. If the item was delivered for free, delivery cost will be deducted.
  • Handling fees will apply at 20% of the purchase price.
  • The return of the item is the responsibility of the buyer.
  • If the item has sustained damage in transit or does not return as noted above, a revised refund amount may be required
    If you would like to take this offer, please send us an email at info@bestdeals.co.nz and indicate the Order ID the item/s you wish to return and the reason for the return. Our Customer Service team will reply to your email and, if applicable, issue you a Return Authorization (RA) number. All other relevant information will be given to you at this time. BestDeals will not accept any return of any item/s without an RA from our Customer Service Representative. For full details on our return policy, visit our Warranty & Returns FAQ

© 2012 - 2024 Best Deals Store. all rights Reserved.